Latest foundation bolt Tenders | Government foundation bolt Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

State Government

CTN :38518480

31 Dec, 2024 NA

Srinagar - Jammu And Kashmir

Tender For supply of spare parts of br mahindra rakahak - 3rd top synchronizer assembly of br mahindra rakshak , needle cage bearing of br mahindra rakshak , first gear big of br mahindra rakshak , streering box assembly of br mahindra rakshak , gear oil 6 ltire , tie rod end set of br mahindra rakshak , leaf spring bush rubber of br mahindra rakshak , leaf spring bush steel of br mahindra rakshak , ball with spring set of br mahindra rakshak , gear box lock washer set of br mahindra rakshak , gear box gasket set of br mahindra rakshak , three bond tube of br mahindra rakshak , self solonide switch of br mahindra rakshak , self bendix lucas of br mahindra rakshak , self brush cards lucas of br mahindra rakshak , self brush set lucas of br mahindra rakshak , self bush lucas of br mahindra rakshak , parking light assembly left and right of br mahindra rakshak , side indicator assembly mudguard left and right of br mahindra rakshak , head light bulb hellogen of br mahindra rakshak , head light gypsy type left and right of br mahindra rakshak , fuse link , fuse 15 amp , lt wire 5 mm , tape roll black , alternator cut out lucas of br mahindra rakshak , alternator rectifier assembly lucas of br mahindra rakshak , alternator oil seal of br mahindra rakshak , alternator oil ring of br mahindra rakshak , horn semi roots set , bulb 1016 , bulb 1141 , bulb 67 , wiper blade left and right of br mahindra rakshak , wiper arm left and right of br mahindra rakshak , wiper link rod with gear set of br mahindra rakshak , back light asembly left and right of br mahindra rakshak , stop switch , reverse plug , pp switch , door lock bus type left and right of br mahindra rakshak , door inner handle bus type of br mahindra rakshak , door outer handle left side bus type of br mahindra rakshak , door outer handle with key bus type of br mahindra rakshak , door hings of br mahindra rakshak , rouf top shocker of br mahindra rakshak , ms tin sheet 4 feet by 6 fett 18 guage , rear door hings upper and lower of br mahindra rakshak , ms rectangular pipe 6 feet by 1 feet 29kg , ms rectangular pipe 2 inch by 1 inch 14 kg , tvs bolt no 10 with nut , tvs bolt no 12 with nut , calcium carbide , ccm rods 500 gram , welding rods , cutting blade 4 inch , door beeding set of 3 pcs of br mahindra rakshak , front door carboard left and right of br mahindra rakshak , chinese screw , door press rubber set of br mahindra rakshak , chassis of br mahindra rakshak , foundation bolt with nut no 14 of br mahindra rakshak , body foundation of br mahindra rakshak , rectangle pipe 6 inch by 1 inch , body filler white , sanding paper blue no 80 , sanding paper blue no 180 , esdee steel primer , flap disc no 60 , deco surfacer grey , deco surfacer white , n c putty 1500 gram , water proof paper no 320 , water proof paper no 220 , milky white paint espa , nc thinner , tarpin oil , matt black espa , silver paint 200 gram , dhoti cloth , masking tape , news paper old 300 gram bid details/ 2 / 60

Central Government/Public Sector

CTN :38186563

18 Dec, 2024 NA

Kanpur - Uttar Pradesh

Tender For bid to ras corrigendum : supply of cable tray support system boltable lot 2 for panki tps 1x660mw up - single channel c1 , double channel c2 , cantilever arm ca1 -220mm arm - complete with all hardwares and accessories as per annexure-a of technical specification , cantilever arm ca2 370mm arm - complete with all hardwares and accessories as per annexure-a of technical specification , cantilever arm ca4 750mm arm - complete with all hardwares and accessories as per annexure-a of technical specification , c1 channel clamp cc1 - complete with all hardwares and accessories as per annexure-a of technical specification , c2 channel clamp cc2 - complete with all hardwares and accessories as per annexure-a of technical specification , angle fitting la1 - complete with all hardwares and accessories as per annexure-a of technical specification , z clamp for 100mm perforated tray tz1 - complete with all hardwares and accessories as per annexure-a of technical specification , base plate for single channel bp1 - complete with all hardwares and accessories as per annexure-a of technical specification , base plate for single channel bp2 - complete with all hardwares and accessories as per annexure-a of technical specification , tray fixing clamp tc1 - complete with all hardwares and accessories as per annexure-a of technical specification , ms galvanized hardware 1nos m6x35mm long pan head bolt 1 nos m6 spring nut 1 nos m6 plain washer , ms galvanized hardware 1nos m12x35mm long pan head bolt 1 nos m12 spring nut 1 nos m12 plain washer and 1 nos m12 spring washer , ms galvanized hardware 1nos m6x25mm long hex head bolt 2 nos m6 plain washer and 1 nos m6 spring washer , ms galvanized hardware 1nos m12x35mm long hex head bolt 2 nos m12 plain washer and 1 nos m12 spring washer , anchor bolt m10 with nut and washer , anchor bolt m12 with nut and washer

CTN :38601364

06 Jan, 2025 NA

Senapati - Manipur

Tender For supply of propeller shaft , spring assy front , shackle assy , bolt , universaln joint , wiper arm , wiper blade , assy rear view outer rh , knuckle bush , flasher , brake pad

CTN :38556434

02 Jan, 2025 NA

Vadodara - Gujarat

Tender For supply of tata mobile ba no 09c 086852k - labour charge for complete vehicle servicing , engine oil 15w40 , diesel fuel filter , oil filter , coolant , steering oil , break oil , clutch oil , air filter , labour for wheel alignment and wheel balancing , labour for fuek tank cleaning , labour for check front disc brake rubber boots calliper , brake rubber boot , labour charge for external clogging of intercoolers and radiator , labour for check all drive belts conditions , labour charge for carryout bleeding of clutch actuation system , labour charge for check proper sealing of air intake system , labour charge for check and tightening all fasterners , fasterners with accessories , labour charge for checking electrical system ensure usage of geniune fuses with correct rating condition of fuse and relay holding base , fuses with relay , labour for check steering wheel play check for proper condition of ball joints and rubber boots of tie rod drag link , rubber boots of tie rod , labour charge for complete servicing of door with necessary replacement , labour charge for checking of wiper assembly and replacement of unserviceable parts , wiper motor assy , wiper linkage , wiper blade , wiper arm , labour charge for complete dismantling and servicing of rear load leaf spring and bending and refitting the same and replacement of unseerviceable parts , rear spring bushing kit , centre bolt , clamp , labour for complete burnt starter from vehicle and replacing following parts , solenoid switch , carbon brush set , bushing set , fitting kit , labour charge for complete dismantling of steering from the vehicle and repair replacement of worn out spares , replacement of steering centre line assy , replacement of steering centre line pin kit , material and labour for servicing washing and greasing bid number/ ( ( ) ): gem/2024/b/5660450 dated/* : 12-12-2024 bid document/ 1 1 / 26

CTN :38572159

27 Dec, 2024 2.00 Lacs

Medininagar - Jharkhand

Tender For supply of led street light and its accessories - item description, led street light 90 w philips / surya/ havells/ bajaj, 32 mm dia(inner dia of pole arm)x 2 mtr long gi pipe (medium class)pole arm bracket for mounting of led street lighting fitting on pole including bending the pipe to required shape (90-105 degree),2 nos. 40mmx 3mm flat iron clamp withs nuts, bolt & washer, gi coating the flat iron with primer and finished paint as per relevant standard specifications., led driver (35 w), led driver (50 w), led driver (70 w), led driver (110 w), led driver (120 w), pcb 70 w, pcb 120 w, 1 core copper wire (1.5 sqmm), 1 core copper wire ( 1 sqmm), 2 core aluminium wire ( 2.5 sqmm), 2 core aluminium wire (6 sqmm), 2 core aluminium wire (10sqmm), switch (6 amp) with gang box, pvc tape, rope light, rope light connector, hand gloves(electrical work), plier, screw driver, tester

CTN :38518566

31 Dec, 2024 NA

Rewari - Haryana

Tender For supply of vehicle spare parts and mechanic tools - clutch master cylinder , air filter , wiper arm , indicator,parking top light , fuel filter , clutch plate, pressure plate, release bearing clutch, pilot brg , rear digi lock , front indicator assy. , oil filter partno-252718130145 , roof light led 24 volt , relay 4 pin , relay 5 pin , switch dashboard , oil filter part no-252518130139 , baby filter , oil filter , front break adjuster , indicator assy. front , wiper blade , gate valve 01inch pipe , gate valve 2.5 inch pipe , door lock handle outer lh rh , door glass beeding , door glass regulator machine rear rh , door glass regulator machine rear lh , floor mat , foot mat set 7d , door visor set rain guard set , data cable , back rest amron , door curtain set , hand rest , flag rod , commandant plate , star box set , star box stand , fan assy.radiator , bearing housing , fan pully , tensioner idealer , bearing fan pully , dala wire , rear view mirror , head light bulb , disc break , ball joint upper , ball joint lower , suspension bush kit , tie rod outer , kit lined shoes , wheel cylinder , shock absorbar , kit pad assembly , link stablisar rod rh , link stablisar lh , spring adjuster , wheel nut , fuel level sensor , fan electric assy. radiator , front hub oil seal , brg inner front , brg outer front , hub nut , clutch sleave cylinder , clutch plate, pressure plate, clutch release brg, pilot brg , front indicator assy. lh , front indicator assy. rh , back light assy. , spark plug , fuel pump motor , battery terminal plus,minus , nut bolt 14no. 16no. 18no. , lt wire .1mm , fuse 10,15,20,30,40,amr , horn 12 volt , horn 24 volt , welding rod 10 no. , welding rod 08 no. , wire lock , flasher 12 volt , areldite tube small , splite pin assorted size , fog light 12 volt , fog light 24 volt , commander light blue , sticker 12 no,05,no , bulb 67 no.24 volt , bulb 24 volt , bulb 24 volt 2441 , bulb 67 no. 12 volt , bulb 1016 no. 12 volt , bulb 1141 no.12volt , meter bulb 12 volt , meter bulb 24 volt , emery paper , old dhoti , duster cloth , putty , metal paste , cutter blade , socket no. 34 taparia , socket no. 36 taparia , socket no. 38 taparia , socket no. 41 taparia , socket no. 42 taparia , socket no. 46 taparia , alen key set star type , t socket wrinch no.08 , t socket wrinch no.09 , t socket wrinch no.10 , t socket wrinch no.11 , t socket wrinch no.12 , t socket wrinch no.13 , t socket wrinch no.14 , half moon spenner no.12x13 , half moon spenner no.16x17 , half moon spenner no. 18x19 , solding iron , solding paste and wire , locking plair , pipe rinch 60mm , combination spaner set , tool trolly with tools , tool box with tools , blow lamp , clutch and pressure plate , clutch release brg. , pilot brg. , power window switch , door glass machine rr , door glass machine rl , timing belt , heater glow plugs , glow plug timer bid details/ 2 / 114

CTN :38213484

18 Dec, 2024 2.70 Lacs

Gurdaspur - Punjab

Tender For bid to ras corrigendum : supply of d10184350 belt drive b 1275 , d10009020 5 rod valve push e3 215 , d10173250 tappet intake and exhaust valve , d10010030 seal o ring 3 point 53x43 point 60 , d10007700 seal o ring 2 point 62x7 point 59 , d10009220 liner cylinder e3 215 , d10009470 bush camshaft e3 215 , d10010040 seal o ring 3 point 80x95 point 20 ms fenner part no 7883 , d10075830 kit engine main and connecting rod bearing set size 010 over size , d10009110 gasket engine oil sump , d10344500 kit crank shaft thrust upper and lower size std dia 84 mm , d10008720 valve exhaust 35mm gauge , d10008730 valve air intake 37 point 9 mm gauge , d10008740 seal valve stem 8mm diameter , d10008960 seal cylinder head cover , d10241940 gasket assy cylinder head e3 215 tci , d10553570 gasket cover valve rocker arm , d10375260 filter assy fuel spin on , d10397750 tube assy fuel feed pump to fuel filter , d10397770 tube assy fuel fiter to fuel injection pump , d10008650 gasket exhaust manifold , d10178440 gasket egr valve , d10217950 gasket turbocharger mounting , d10217960 gasket exhaust elbow e3 point 215 tci , d10240560 hose outlet breather g30 tci , d10009120 seal oil crankshaft rear m s fenner part no 7845 , d10150320 ring flywheel gear z -126 , d10237930 gasket flywheel housing , d81501890 bolt m12x1 point 75x45-10 point 9 hex head , d10009630 gasket fuel injection pump , d10016330 pipe assembly fuel filter to fip , d10039010 stud injector m8x51 , d81500110 bolt m8x1 point 25x20-8 point 8 hex head , d10109550 tube assembly fuel injection leak off , d10214680 pipe injector overflow , d10016120 gasket muffler inlet , d10198140 gasket intake manifold e3 215 tci , d10203900 kit engine piston ring set e4455pt , d10073790 point 9 kit engine set of piston pin and circlip e3 point 215 side drain , d10008810 point 9 adapter lub oil pump , d10009790 point 9 gasket lube oil suction pipe , d10098690 point 9 pump assembly engine lube oil , d10202830 point 9 sensor unit water temp gauge , d10206600 point 9 sensor unit oil pressure gauge , d10657110 point 9 filter assy lube oil , d10174930 point 9 solenoid assy genset engine safety , d10239700 point 9 bracket solenoid stop assembly , d10011750 point 9 therostat assembly water , d10011760 point 9 gasket water outlet , d81500030 point 9 bolt m8x1 point 25x35 6 point 6 hex head , d10009330 point 9 gasket timing gear housing , d10009520 point 9 gasket timing gear cover , d10009540 point 9 gasket fip gear inspection cover , d10009550 point 9 seal oil crankshaft front m s fenner part no 7844 , d10194820 point 9 gasket water pump , d10368920 point 9 pump assy water , d10317690 point 9 liner cylinder e3 point 249 , d10292990 point 9 nozzle piston cooling e4 point 312tci , d87500290 point 9 pin 16x15 sleeve , d10251170 point 9 bearing crank shaft main upper e4 point 286 tci , d10251160 point 9 bearing crank shaft main lower e4 point 286 tci , d10251190 point 9 ring crankshaft thrust upper e4 point 286 tci , d10251180 point 9 ring crankshaft thrust lower e4 point 286 tci , d10317700 point 9 seal o ring 3 point 60x102 point 2 cylinder liner , d93600690 point 9 seal o ring 1 point 6x8 point 1 , d10458050 point 9 pump water and hub assembly , d10049520 point 9 guide engine valve e430 435 , d10448590 point 9 gasket cylinder head e4 point 368 tci , d10239270 point 9 gasket cylinder head cover e4 point 286 , d10309530 point 9 gasket tube rocker cover , d10009020 point 9 rod valve push e3 point 215 , d10009280 point 9 ring camshaft thrust plate , d10449230 point 9 gasket turbocharger mounting e4 point 368 tci , d10198880 point 9 filter assembly secondary for turbocharger , d10026550 point 9 switch assembly oil pressure , d10253780 point 9 gasket turbocharger oil drain , d10449240 point 9 gasket turbo charger mounting e4 point 368 tci d6 , d10344540 point 9 piston 98mm e4 point 368 tci , d10448550 point 9 pin piston e4 point 368 tci , d10212500 point 9 bolt m10x1 point 25x52 10 point 9 connecting rod , d10471000 point 9

CTN :38605086

30 Dec, 2024 NA

Multi City - Multi State

Tender For supply of 5 mtr. long gi octagonal pole with internal & external surface of the pole shall be h ot dip galvanized to 65 micron det, hot dip galvanized in single dip as per bs en iso 1461. the pole shall be continuously tapered with top dia 70mm (a/f), bottom dia 130mm (a/f) & minimum sheet thickness 3m m with inbuilt junction box i.e. flush door & base plate size minimum 200 mm x 200 mmx 12 mm with dou ble arm bracket of size 1000 mm each & standard arm cap and cable terminal board for internal connectio n of cable. the poles shall be designed as per bsen 40-3-3:2003 with latest amendment to withstand the m aximum wind speed as per is 875 for the actual loading of the fixtures. bolt size (no. x dia) - 4 x 16 mm, pc d - 200 mm, bolt length -450 mm & projected bolt length -80 mm. category reference:- bajaj bop-5030 [ w arranty period: 30 months after the date of delivery ]

CTN :38588816

03 Jan, 2025 NA

Jalandhar - Punjab

Tender For supply of bushing,fan spacer,bolt gas ket,strap,exhaust elbow,hex screw,radiator out cet,radiator inlet,hose te 20247,push pull cable,accelarator rod,unversal,special screw,hyd hose at173965,hyd hose at 172651,air fitter,oil tube,hose at 179137,fuse box,relay,joint,fan belt,fuel fitter cartrid,lubricant oil filter,seal oil ring,suction hose,loader arm pin 380091,loader arm pin 3b 0076,loader bucket,suction hose,bucket hose,cabin seal kit,hand pump seal,loader lift,bush lift,battery isolater,arm cylinder

Foundation Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector